“Mach3 Stand Alone Computers”

All included items with a “Mach3 Stand Alone Computer”

CNC-Aid.com has modified and created “Mach3 Stand Alone Computers” which are Extremely Small (compared to your standard PC), they are Affordable and Dedicated to “get the most” out of the Mach3 CNC Controller Software to control Multi Axis CNC Machines of many types. Mach3 with these Stand Alone Computers is now as capable as it ever was, without needing to deal with ongoing conflicts from constant Operating System and Hardware Computer Changes (which eventually affects all PC based CNC Controller Software at some point). These Mach3 Stand Alone Computers do not require constant conflicting software updates or hardware changes. They will control your CNCs as well as other newer PC based Software Controllers without costing you an arm and a leg. Mach3 and these Stand Alone Computers are all you need from now on to control up to 6 axis CNC Mills, Routers, Lathes, etc…

Try one:
Just plug it in, Connect the Monitor of your choice, configure Mach3 for the CNC Machine you’re using, and you’re ready to go!!!

These CNC-Aid.com “Stand Alone Computer” have all the functionality to properly run Mach3 as intended.

See our Video for the simplicity of the clean and easy setup.

Here are some Highlights:

Each “Mach3 Stand Alone Computer” comes with a Wireless Keyboard/Mouse and Cables.

Each “Mach3 Stand Alone Computer” has Mach3 installed and tested (Demo Version)

We can provide you with an official registered License for Mach3 which retails for $175.00. Our Price $159.00

You can connect pretty much any Monitor with a VGA or DVI port, or even a “Touch Screen POS Monitor”. The driver for the Touch Screen POS Monitor (shown in our Video) is already installed for you and tested (The Touch Screen POS Monitor is NOT Included).

The “Mach3 Plugin” for the “Vista CNC Pendant” (shown in our Video) is also already installed for you and tested (The Pendant is NOT Included).

Because of this inexpensive solution… you can dedicate a “Mach3 Stand Alone Computer” for each CNC Machine you may have so you can “run them all at the same time”.

These “Mach3 Stand Alone Computers” are also capable of being Networked as well so you could control them all from a single source computer.

The bottom line is… you have a more dependable system and less chance of ruining your job due to “CNC Control Conflicts” etc… which could arises from the need to constantly upgrade the Computer’s Operating Systems, and unrelated Software or Hardware issues. You won’t be facing these issues once you commit to these inexpensive dedicated CNC-Aid.com “Mach3 Stand Alone Computers”. You just need to keep your CNC System “Offline” to prevent viruses, and use it/them strictly for your CNC operations.
Please be aware that this small computer is only intended to operate your Mach3 CNC machine and uses a dependable modified Windows XP operating System. You should not load any other software on it because it works great as is. It also has 2GB of storage for all your NC programs which is more than most users would ever need. It should also go without saying that you will probably need to edit the settings in Mach3 to suit your CNC machine. Mach3 has great videos to help you with that at:
https://www.machsupport.com/help-learning/videos-tutorials/
Please note: Mach3 license Information:
Non-commercial users (aka hobbyists) are permitted to use one Mach license for as many machines as they require. For commercial users (anybody who uses the software to generate profit) require a separate license purchase for each machine.

FREE Shipping USA (Lower 48) and Canada. Please contact us for a Shipping Quote anywhere else.